Utilities and engineering firms around the world trust WaterCAD as a reliable decision-support tool for their infrastructure.
#Water cad free download software
In this case, insert a pump in pipe P-10.WaterCAD CONNECT Edition 10.00.00.50 | 572.2 mbīentley Systems Inc., the leading company dedicated to providing comprehensive software solutions for sustaining infrastructure, has released the 10.00.00.50 version WaterCAD CONNECT Edition is an easy-to-use hydraulic and water quality modeling application for water distribution systems. If you wish to insert a pump into an existing pipe, click on the pump symbol in the tool palette and drag the cursor over the pipe to the position where you wish to insert the pump. The following screen shows installing the pump while drawing the system layout. Adding a Pump To add a pump, either include it when drawing the network or use the pump tool to insert it into an existing pipe. Model the well as a reservoir with known grade of 85-ft. For the purposes of this handout, consider the addition of a well and a pump, connected to the system at node J-6. Another is to add a third source and/or a pump. One way to resolve the problem is to increase the grade line in one or both tanks by operating at greater storage levels. There are many ways to resolve this problem-and that is frequently one of the challenges a civil engineer faces. Click Finished.ĩ Introduction to WaterCAD It was noted the pressures at each junction are below the DHEC standard of 25 psi. For this example, there is no prototype data. You would use this if all of the pipes have the same diameter or Hazen-Williams coefficient. The fourth setup wizard allows you to specify data that is common to all pipes, nodes, pumps, tanks, etc. You would use the scaled drawing only if you import a *.dxf or GIS shapefile as the background drawing onto which you draw the pipe network. Indicate you will be using schematic drawing scale.
Use the third setup wizard to indicate the drawing mode and specify symbol and text size. For most applications, you will accept the defaults. Please note the default friction method and input modes. The second allows you to select the friction method, type of liquid, and various input modes. After you have entered this information, click Next in the lower right corner of the dialogue. These will appear in the title block of hard-copy output. The first allows you to provide a project title and enter the name of the project engineer. WaterCAD will display screens for four setup wizards. Give the file name as Example Problem (or whatever name you desire) and click Save.
This will result in the second dialog where you provide a file name. After the program has started, you will see the following start-up dialog. Pipe No Length Diameter C HW (feet) (inches) P P P P P P P P PĢ Introduction to WaterCAD Getting Started Start the program according to instructions provided in class. (b) Determine the HGL (feet) and pressure (psi) at each node. (a) Determine the magnitude (gpm) and direction of flow in each pipe. The water surface elevation (HGL) is 135 feet in tank T-1 and 140 feet in tank T-2.
Pipe data are summarized in the table following the schematic drawing. The demands at junctions J-3, J-5 and J-6 are 150, 200 and 150 gpm, respectively. This system has 9 pipes, 6 nodes, and 2 supply tanks. Example Problem Given the water distribution network shown in the following schematic. Step-by-step instructions, augmented by screen captures, will guide you through the solution of the following problem.
#Water cad free download how to
This handout was prepared to provide guidance to learning how to use the program. 1 Introduction to WaterCAD Introduction to the WaterCAD Program This semester, you will use the WaterCAD program by Haestad Methods, Inc., to accomplish a project wherein you analyze a water distribution system to identify problem areas and evaluate a number of potential remedial actions.
0 kommentar(er)
